AR-15 PISTOL UPPER

AR-15 Pistol Upper | 7.5" WYLDE 1/7 Carbine | 7" M-LOK HandGaurd Complete Pistol Upper Build Kit

0 Review(s) Write a Review

Your Price: $349.99

Retail Price:$520.00

Your Savings:$170.01(33%)

Part Number: GM-.223W-SPK-1135

Availability: In Stock

In-store Pickup Available

DISCLAIMER *

ASSEMBLY OPTIONS *

SIGHTS *

RED DOT *

Quantity

Description

Introduction:

Gorilla Machining (WYLIE) 7.5" AR-15 .223 WYLDE Pistol Upper Build kIT is designed as a fully Mil-spec compliant pistol series upper for every level of shooter. This pistol upper has the same level of quality and performance that you have come to expect from all of Gorilla Machining products Made In USA. It has been configured at a price range that is affordable to shooters of any budget without sacrificing features and quality.Each component is manufactured to Mil-spec standards and backed by Gorilla Machining Lifetime Warranty.

NOTE: Some states and areas, like California, New York, New Jersey, Connecticut, Massachusetts require certain options and modifications. Please check with your local FFL if you have questions regarding legality as we cannot be responsible for laws in every state or county.

NOTE:This item is an NFA (less than 16" overall barrel length) upper when used on a rifle lower. :

Features:

Caliber:

.223 Remington If you want the same versatile, reliable performance as a .223 Remington rifle, but in a smaller, more compact package, then this .223 Remington Pistol Upper Build Kit is for you! With our wide variety of upper build kit options, your pistol can be as agile, compact, and loud as you want it to be. Rifles chambered for .223 Wylde are multi-caliber' and can fire 5.56x45mm cartridges alongside .223 Remington.

Warfare Barrel:

GM AR-15 .223 wylde NATO 7.5", BR 1:7 Twist Barrel This barrel is 7.5-inches and operates on a carbine gas system and is chambered for .223 wylde It features a 1:7 twist rate which works well to stabilize heavier projectiles. It is made from high-strength material to keep this barrel tough and reliable and perfect for your next pistol build.

Muzzle Device:

AR-15 1/2x28 TPI GI Birdcage Flash Hider A2 This A2 flash hider has a classic and effective design. Flash hiders are essential in position concealment and keeping your vision clear; especially in low light situations. This design has a flat bottom which means the gasses won't kick up dust because they are directed up and to the sides. It has a 1/2x28 thread pitch and a Manganese Phosphate finish to protect it from corrosion. This A2 flash hider is a classic because it simply does a great job.

Handguard:

"Black Bear" 7" M-Lok Flat-Face Handguard W/ Low top picatine rails, Class 3 anodized . With these attributes makes this a Premium 7" M-Lok Handguard. This Handguard Allows You To Comfortably Grip Your Rifle In A Variety Of Shooting Positions And Securely Mount A Variety Of Accessories.

Upper Receiver:

Gorilla Machining Mil-Spec AR-15 Upper w/ M4 Feedramps - 7075 T6 Aluminum Built On An Upper Receiver Forged From 7075-T6 Aluminum. This Stripped Upper Is Precision Machined To Mil-spec M16/M4 Specifications And Features M4 Feedramps.

Bolt Carrier Group:

Ballistic Company 5.56 NATO Slabside Complete BCG has a simple, classic design. It is machined from 9310 steel which means this BCG is tough and durable. The nitride finish helps make it resistant to corrosion and increases its strength. It has been MPI and HPT tested to ensure its quality. All of these characteristics make this a high-quality, durable BCG.

Charging Handle:

Includes AR-15 Billet Ballistic Company Charging Handle Class 3 Anodized.

Pistol Tube Kit:

Gorilla Machining AR Pistol Receiver Extension Kit comes with everything you need to get your pistol up and running. The package includes a steel endplate, castle nut, buffer, buffer spring, and a Mil-Spec anodized aluminum pistol receiver extension. The lightweight construction will ensure that your pistol stays trim and agile, and the tube’s ergonomics will augment comfort and efficiency while shooting.

LPK:

The Gorilla Machining AR-15 lower parts kit is a one stop purchase to get everything you need to complete your first or tenth lower receiver. This AR-15 LPK is made up of Mil-Spec components for maximum compatibility with all lower receivers. It not only comes with the small springs, detents, and pins, but also a Mil-Spec trigger group, A2 pistol grip, and a billet machined trigger guard. The trigger guard is enlarged to give you enough room to pull the trigger if you are wearing gloves. This Mil-Spec complete lower parts kit by GM is an affordable way to complete your build.

Specifications:

Caliber: .223 WYLDE
Classification: Pistol
Barrel: WarFare 7.5" .223 WYLDE Barrel pistol Gas, Government Profile
Twist Rate: 1:7T
Thread Pitch: 1/2x28
Upper Receiver: Gorilla Machining Mil-Spec AR-15 Upper w/ M4 Feedramps - 7075 T6 Aluminum
Handguard: Gorilla Machining "Black Bear" 7" M-Lok Flat Face Handguard
Gas Block: Micro Low-Profile Gas Block for .750 O.D Barrel Steel
Gas Tube: Gorilla Machining Pistol Length Gas Tube
Muzzle Device: Gorilla Machining AR-15 1/2x28 TPI GI Birdcage Flash Hider A2
BCG: Ballistic Company AR-15 .223/5.56 Black Nitride BCG
Charging Handle: AR-15 Billet Ballistic Company Charging Handle Class 3 Anodized.
LPK: GM AR-15 Mil-spec Lower Parts Kit
Buffer Tube Kit: GM Pistol Buffer Tube Kit

AR-15 Pistol Upper | 7.5" WYLDE 1/7 Carbine | 7" M-LOK HandGaurd Complete Pistol Upper Build Kit

Choose Options

Recently Viewed Items