*****NOTE WE DO NOT SHIP THIS PRODUCT TO NEW JERSEY BUYERS ARE RESPONSIBLE FOR KNOWING THERE STATE LAWS **********
Anchor Harvey Raw 80 Percent Lower with Optional Safety Engraving
Forged by Anchor Harvey, this 80 percent lower is not an FFL item and is classified by the ATF as a non-firearm. Made from 7075 T7 heat-treated aluminum, this lower features flared and broached magwells and is “finished in Black. All that’s required is machining of the trigger and the safety well before it’s a fully functional, mil-spec lower receiver.
Designed to work perfectly with our selection of upper receivers and other AR parts and build to withstand rugged use, this lower receiver allows you to fully customize your AR15 build easily and quickly. Review the lower’s specifications and shop today for the best pricing around.
Shipping Restriction: Can not ship to NJ
Lower:
- 80% machined (just needs trigger and safety well machined)
- Type 3 Anodized Hardcoat
- T7-7075 aluminum
- heat treated
- Magwells are flared and broached
- Anchor Harvey
Brace:
BREACH BRACE PISTOL STABILIZER
THE BREACH IS AN ATF APPROVED PISTOL STABILIZER BRACE THAT WAS DESIGNED TO BE LOW PROFILE AND EASY TO INSTALL FOR THE END USER. IT IS BUILT TO FIT ON ALL AR-15 PISTOL BUFFER TUBES UP TO 1.25? AND REQUIRES NO SPECIAL EXTENSIONS OR TOOLS TO INSTALL. THIS SLEEK AND LIGHTWEIGHT STOCK IS PERFECT FOR ANY PISTOL BUILD!
- ATF approved for pistol use
- Snag free design to prevent any tangles with gear
- Brace offers greater stability, accuracy and control when firing
- Fits on an AR-15 pistol buffer tube up to 1.25? diameter (AR, Glock, CZ Scorpion Evo 3, HK9X, etc)
- Forearm strap slots
- Install is simple and requires no special tools
- Lifetime warranty
For your safety, Trinity Force recommends this part be installed by a competent, qualified gunsmith/installer with an understanding of the weapon platform that the part is being installed on. Always make sure the firearm is unloaded and pointed in a safe direction when working.
- Length (in) 6.25"
- Height (in) 5.25
- Width (in) 1.3
- Weight (oz) 5.1 oz
- Receiver Extension Type
- Up to 1.25" Pistol Tube
- Material
- Reinforced Polymer
- Color Black
- Includes
- Pistol tube
- Castle nut
- Mil-spec endplate
- .308 Music Spring
- Mil-Spec Buffer
- Trinity Force Breach Pistol Brace New Item ATF Approved
LPK:
The Gorilla Machining AR-15 lower parts kit is a one stop purchase to get everything you need to complete your first or tenth lower receiver. This AR-15 LPK is made up of Mil-Spec components for maximum compatibility with all lower receivers. It not only comes with the small springs, detents, and pins, but also a Mil-Spec trigger group, A2 pistol grip, and a billet machined trigger guard. The trigger guard is enlarged to give you enough room to pull the trigger if you are wearing gloves. This Mil-Spec complete lower parts kit by GM is an affordable way to complete your build.
Includes:
- Trigger
- Trigger Spring
- Hammer
- Hammer Spring
- A2 Grip
- Buffer Retainer Pin
- Buffer Retainer Spring
- Trigger Guard
- Safety Selector
- Bolt Catch Spring
- Detent Spring
- Bolt Catch Plunger
- Bolt Catch
- Disconnector
- Disconnector Spring
- Magazine Catch Spring
- Bolt Catch Roll Pin
- Magazine Release Button
- Magazine Catch
- Pivot Pin
- Selector Spring
- Safety Selector Detent
- Rear Take Down Pin
- Takedown Pin Detent
